SPORTEC® UNI classic sandwich consists of a technically advanced elastic layer made from SPORTEC® standard 2.0 material and a tried and tested SPORTEC® UNI classic floor covering. This combination prevents damage to joints and other injuries and is therefore particularly recommended for indoor sports facilities in schools, leisure centres and multi-purpose buildings. Both the elastic layer and the floor covering are supplied in rolls. The two layers are however installed separately. First, the elastic layer is glued to the substructure. After the adhesive has fully cured, the floor covering is glued to the elastic layer.
SPORTEC® UNI classic: fine-grain EPDM colour granules bonded with PU-elastomer.
SPORTEC® standard 2.0: fine-grain recycled tyre rubber granules bonded with PU-elastomer.
The elastic layer and the top layer are delivered as separately not agglutinated rolls.
Both will be glued on site.
Low colour differences are conditional of material.
top layer: 4 mm (± 0.3 mm)*
elastic layer: 4 mm (± 0.3 mm)*
(* other thicknesses on request)
top layer: 1,250 mm (± 1.5 %)
elastic layer: 1,500 mm (± 1.5 %)
top layer: 15 m (± 1.5 %) (at 4 mm)*
elastic layer: 30 m (± 1.5 %) (at 4 mm)*
(* other lengths on request)
French VOC Regulation (A+)